Modifying A Vlan From The Component Tree Menu - Extreme Networks EPICenter Software Installation Manual

Figure 168: The Modify VLAN dialog, IP Forwarding page
12 Select a switch from the table of switches.
13 Change the IP address and IP mask as appropriate. Click the Enable IP forwarding check box to
enable or disable IP forwarding for this VLAN on the switch.
14 Click Apply to implement the changes.
15 Click Close to exit the window.

Modifying a VLAN from the Component Tree Menu

To start the Modify VLAN process for a VLAN in the Component Tree, follow these steps:
1 Select a VLAN in the Component Tree.
2 Right-click to display the pop-up menu, and select Modify VLAN Membership.
The Modify Membership of VLAN dialog opens, as shown in Figure 169.
EPICenter Software Installation and User Guide
Modifying a VLAN
337