HP XP P9500 Manual page 96

Hp p9000 for business continuity manager software messages
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 26 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKW0x) (continued)
Message ID
YKW007E TSO
YKW008E TSO
YKW009W TSO
YKW010E TSO
YKW098E TSO
YKW099I TSO
96
Messages
Message Text
YKQUERY error return code =
nnnn.
YKCONMSG error return code
= nnnn
Terminated due to Operator
attention.
Processing error encountered.
Reason code = rrrr
Invalid parameter-reason-message
Group copy-group has reached
the desired state state.
Explanation and Recommended Actions
P9000 for Business Continuity
Manager Software Reference Guide.
The YKWATCH command uses the YKQUERY command
to establish the copy group status start baseline. An
error occurred during execution of the YKQUERY
command.
Conduct an investigation using the ISPF panel
interface's load function.
nnnn
Return code of the YKQUERY
command
For details, see the description for
the YKQUERY command in the HP
P9000 for Business Continuity
Manager Software Reference Guide.
The YKWATCH command uses the YKCONMSG command
to monitor the console message traffic of IEA494I
copy status messages. An error occurred during
execution of the YKCONMSG command.
nnnn
Return code of the YKCONMSG
command
For details, see the description for
the YKCONMSG command in the HP
P9000 for Business Continuity
Manager Software Reference Guide.
An interrupt occurred during execution of the YKWATCH
command. The TSO/E command issued within the
YKWATCH command cannot be completed.
Re-execute the command.
An error occurred during execution of the YKWATCH
command. The YKCONMSG command issued within the
YKWATCH command cannot be executed correctly.
rrrr
Return code of the YKCONMSG
command
For details, see the description for
the YKCONMSG command in the HP
P9000 for Business Continuity
Manager Software Reference Guide.
The YKWATCH command detected an invalid startup
parameter.
This message is issued to notify the user that the copy
group identified by copy-group entered the requested
status identified by state.
copy-group
Copy group ID

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000 for business continuity manager 6.6.1

Table of Contents