HP XP P9500 Manual page 149

Table 43 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ3x) (continued)
Message ID
YKZ331E TSO RC=64
YKZ332E TSO RC=64
YKZ333E TSO RC=64
YKZ340T TSO RC=48
YKZ341E TSO RC=48
YKZ343E TSO RC=48
Message Text
command terminated with an invalid
return code. (r).
command detected the system abend
during rexx-service processing.
(code=sss, reason=rrrr).
command detected the user abend
during rexx-service processing.
(code=uuuu, reason=rrrr).
Supplied parameters invalid.
No DEVN() supplied.
DEVN() value invalid.
Explanation and Recommended Actions
For details, see the TSO/E REXX
User's Guide.
n (decimal number)
Reason code from the REXX
service.
For details, see the TSO/E REXX
User's Guide.
The CLI command terminated with an invalid return
code.
command
Issued CLI command name.
r
Return code that the CLI command
created.
An abnormal system termination was detected during
the REXX service processing.
command
Issued CLI command name.
rexx-service
Name of the REXX service where
the abnormal system termination
was detected.
sss (hexadecimal number)
System completion code.
For details, see the MVS System
Codes.
rrrr (hexadecimal number)
Reason code.
An abnormal user termination was detected during
the REXX service processing.
command
Issued CLI command name.
rexx-service
Name of the REXX service where
the abnormal user termination
was detected.
uuuu (decimal number)
User completion code
For details, see the MVS System
Codes.
rrrr (hexadecimal number)
Reason code
Invalid parameters are specified.
Nothing is assigned to the DEVN parameter.
The value specified in the DEVN parameter is invalid.
List of Messages 149