HP XP P9500 Manual page 116

Table 35 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ0x) (continued)
Message ID
YKZ099I TSO SC=0
Table 36 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ10x – YKZ20x)
Message ID
YKZ103E MSG SC=48
YKZ201E MSG CON PRT
#
SC=44 RC=44
1 16 Messages
Message Text
command-name command return
code=nnnn, reason code=rrrr
Message Text
Parameters combination is invalid
A GETMAIN error occurred. (return
code=nnn, size=mmm, area=area,
cmd=xxx, pos=yyy)
Explanation and Recommended Actions
Check the ROUTE parameter, DAD parameter, route
list definition file, and command device definition file
specified in the YKLOAD command execution.
The command identified by command-name terminated
with the return code nnnn, and the reason code rrrr.
This message is always displayed to indicate the return
code and the reason code.
nnnn
Maximum among the severity
codes returned during command
execution
Explanation and Recommended Actions
The parameter combination is invalid.
The command cannot be executed because a
GETMAIN error occurred.
Expand the job execution area, and then re-execute
the command.
nnn (decimal number)
Return code from the GETMAIN macro
mmm (decimal number)
Area size
area (string)
HIGH must be equal to or greater
than 16 MB; LOW must be less than
16 MB.
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
0: YKLOAD, tool, or any command
1: YKMAKE
2: YKSCAN
3: YKQUERY
4: YKRESYNC
5: YKSUSPND
6: YKDELETE
7: YKEWAIT
8: YKRECVER
9: YKSTATS
10: Remote scan function, NG scan
function
11: YKBLDPTH
12: YKDELPTH
13: YKQRYPTH