HP XP P9500 Manual page 39

Table 7 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKG0x) (continued)
Message ID Message Text
YKG052W MSG Expecting new element.
SC=4 RC=4 Found "string".
(file:rec#)
YKG053W MSG Unrecognized Version
SC=4 RC=4 attribute value: value
(file:rec#)
YKG054E MSG Unexpected termination of
SC=36 RC=36 element: name
(file:rec#)
YKG074E MSG Invalid "&" character
SC=36 RC=36 discovered in quoted string.
(file:rec#) string
Explanation and Recommended Actions
rec#
Number of the line in the file identified by file
where the error was detected
XML input analysis detected a syntax error on the line with the line
number identified by rec# in the file identified by file.
Check the indicated line, and then identify the cause of the problem
by referring to information contained in the XML document type
definitions, in the HP P9000 for Business Continuity Manager
Software Reference Guide.
string
Character string where the error was detected
file
Name of the XML file where the error was detected
rec#
Number of the line in the file identified by file where the error was
detected
The system does not recognize the version attribute value of the
XML element that exists on the line with the line number identified
by rec# in the file identified by file.
Check the indicated line, and then identify the cause of the problem
by referring to information contained in the XML document type
definitions, in the HP P9000 for Business Continuity Manager
Software Reference Guide.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
The XML element name that exists on the line with the line number
identified by rec# in the file identified by file has not been correctly
created.
Check the indicated line, and then identify the cause of the problem
by referring to information contained in the XML document type
definitions, in the HP P9000 for Business Continuity Manager
Software Reference Guide.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
The & character string that exists on the line with the line number
identified by rec# in the file identified by file has not been correctly
escaped.
See the description of Extensible Markup Language (XML) 1.0 at
http://www.w3.org
file
List of Messages 39