HP XP P9500 Manual page 41

Table 7 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKG0x) (continued)
Message ID Message Text
YKG079E MSG YKVSET program failure for:
SC=44 RC=44 name = value
(result)
YKG085E MSG Unable to read configuration
SC=40 RC=40 file.
(file:rec#)
YKG088E MSG File Open error: dsstate.
SC=40 RC=40
(file)
YKG089E MSG File Close error: dsstate.
SC=40 RC=40
(file)
YKG090E MSG File Allocation Failed: dsstate.
SC=40 RC=40
(file)
YKG091E MSG File Deallocation Failed:
SC=40 RC=40 dsstate.
(file)
Explanation and Recommended Actions
v.r.m
API level
For details about this value, see the information
about the XML document type definitions in the
HP P9000 for Business Continuity Manager
Software Reference Guide.
This error can be caused by an invalid value being specified for
the STEM parameter.
The configuration file could not be read, because the record length
is too long.
file
Name of the XML file where the error occurred
rec#
Number of the line in the file file where the error
was detected
An attempt to open the XML file identified by file failed.
dsstate
Status of the input XML file
file
Name of the XML file where the error was
detected
An attempt to close the XML file identified by file failed.
dsstate
Status of the input XML file
file
Name of the XML file where the error was
detected
An attempt to allocate the XML file identified by file failed.
dsstate
Status of the input XML file
file
Name of the XML file where the error was
detected
An attempt to deallocate the XML file identified by file failed.
dsstate
Status of the input XML file
file
Name of the XML file where the error was
detected
List of Messages 41