HP XP P9500 Manual page 144

Table 42 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ29x) (continued)
Message ID
YKZ293E MSG CON
SC=0 RC=0
YKZ294E MSG CON
SC=0 RC=0
YKZ295E MSG SC=36
RC=36
YKZ296E MSG SC=44
RC=44
144 Messages
Message Text
The specified value for the system
symbol &YKLOGPT is invalid.
An error occurred while acquiring
the system symbol &YKLOGPT. (rc=rr)
The version of this configuration file
is not supported.
A JNLG is not registered in EXCTG.
(JNLG=jj, MIRROR=m, EXCTG=e,
SN=ssssssssssss)
Explanation and Recommended Actions
Previous log dataset (YKLOG01 or YKLOG02)
YKLOGnn
New log dataset (YKLOG01 or YKLOG02)
jjj
Job name
xxx (decimal number)
Command code for the command
that was executing when the log
dataset was switched
See the description for the
command code in the YKZ201E
message.
yyy (string)
Maintenance information
The value specified for the &YKLOGPT system symbol
is invalid. The program continues processing while
assuming LOGR.
Revise the value specified for the &YKLOGPT system
symbol.
An error occurred while acquiring the &YKLOGPT
system symbol. The program continues processing
while assuming LOGR.
Revise the value specified for the &YKLOGPT system
symbol.
rr
The return code of the ASASYMBM
macro
The version of this configuration file is not supported.
The journal group is not registered in EXCTG.
The journal group registration to EXCTG might have
failed because the YKMAKE command has not been
executed on the copy group container with EXCTG
ID specified, or an error occurred during the
execution of the YKMAKE command. Alternatively,
the journal group might have been removed from
EXCTG because the YKRECVER command has been
executed on the copy group container with EXCTG
ID specified.
Remove the cause of the problem if the YKZ297E
message is output during the execution of the
YKEWAIT or YKQUERY command after executing the
YKMAKE command on the copy group container with
EXCTG ID specified. Then execute the YKMAKE
command again with a SELECT(COND) specification
to register the journal group to EXCTG.
Note that, to register an existing journal group in
EXCTG, you need to execute the YKQUERY command
before executing the YKMAKE command with a
SELECT(COND) specified. In this case, the YKZ296E