HP XP P9500 Manual page 118

Table 36 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ10x – YKZ20x) (continued)
Message ID
YKZ204E TSO RC=40
YKZ205E TSO RC=0
1 18 Messages
Message Text
#
A REXX write error occurred. (return
code=nnn, name= name,
value=value, cmd=xxx,
pos=YKZ239E MSG SC=48
RC=48yyy)
A Parameter error occurred.
(detail=message-text, cmd=xxx,
pos=yyy)
Explanation and Recommended Actions
yyy (string)
Maintenance information
#
If the REXX variable that the system tried to read
does not exist, 36 is returned. Also, if this message is
output while the YKLOAD command is being executed,
the RC is 44.
The command cannot be executed because a REXX
write error occurred.
If the nnn value is 32:
Expand the job execution area, and then re-execute
the command.
If the nnn value is 40:
Check that the REXX program is running in the
TSO/E environment, and then re-execute the
command.
If the nnn value is not 32 or 40:
Correct the configuration file (XML) and the values
assigned to the parameters.
If the error still exists after the above action has been
taken, contact the service representative.
nnn (decimal number)
Return code from the OS's REXX variable access
routine
name (string)
REXX variable name
value (string)
REXX variable value
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code description
in the explanation of the YKZ201E
message.
yyy (string)
Maintenance information
#
If this message is output while the YKLOAD command
is being executed, the RC is 44.
The command cannot be executed because a
parameter error occurred.
message-text (string)
Message text
xxx (decimal number)
Command code of the command
that was executing when the error
occurred