HP XP P9500 Manual page 58

Table 9 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKL0x) (continued)
Message ID
YKL005E MSG
SC=48 RC=48
YKL006E MSG
SC=48 RC=48
YKL007E MSG
SC=48 RC=48
YKL050W MSG
SC=4 RC=4
(file:rec#)
YKL051E MSG
SC=36 RC=36
(file:rec#)
YKL053W MSG
SC=4 RC=4
(file:rec#)
YKL054E MSG
SC=36 RC=4
(file:rec#)
58 Messages
Message Text
STEM(stem) does not include
trailing "." character.
Unable to execute without
valid PREFIX parameter.
Unable to execute without
valid GROUP parameter.
Unrecognized element
encountered: name
End of file encountered in
comment.
Unrecognized Version
attribute value: value
Unexpected termination of
element: name
Explanation and Recommended Actions
The last character of the STEM parameter is not a period.
stem
Stem name assigned to the STEM parameter
Specify a valid PREFIX parameter.
Specify a valid GROUP parameter.
Correct the specification on the line with the line number identified
by rec# in the file identified by file. If the error still exists, contact
technical support for assistance.
name
XML element name
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
Check that the XML comments are balanced. Be careful to ensure
that any XML comments will not be nested. If the error still exists,
contact technical support for assistance.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
The system does not recognize the version attribute value of the
XML element that exists on the line with the line number identified
by rec# in the file identified by file.
Check the indicated line, and then identify the cause of the
problem by referring to information contained in the XML document
type definitions, in the HP P9000 for Business Continuity Manager
Software Reference Guide.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
The XML element name that exists on the line with the line number
identified by rec# in the file identified by file has not been correctly
created.
Check the indicated line, and then identify the cause of the
problem by referring to information contained in the XML document