HP XP P9500 Manual page 137

Table 39 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ26x) (continued)
Message ID
YKZ263E MSG CON
SC=0 RC=0
YKZ264E MSG CON
SC=0 RC=0
YKZ265E MSG SC=48
RC=48
YKZ266I PRT RC=0
YKZ267E MSG CON
SC=0 RC=0
Message Text
A YKLOGnn I/O error. (text,
cp=xxx:yyy)
A YKLOGnn close error occurred.
(rc=nnn, cp=xxx:yyy)
This operation (operation) does not
support the reverse-resync mode.
Parameters were input. ( nnn, xxx )
A YKLOGnn DEVTYPE macro error
occurred. (rc=nnn, reason=mmm,
cp=xxx:yyy)
Explanation and Recommended Actions
An I/O error occurred in YKLOG01 or YKLOG02.
YKLOGnn
YKLOG01 or YKLOG02
text
Message acquired by the
SYNADAF macro
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
A close error occurred in YKLOG01 or YKLOG02.
YKLOGnn
YKLOG01 or YKLOG02
nnn (decimal number)
Return code from the CLOSE
macro
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
The YKSUSPND command, which reverses the TCA
or Cnt Ac-J Z copy direction, does not support this
operation.
operation
Operation name
A parameter was entered from SYSIN.
nnn (decimal number)
Number of lines
xxx (character string)
Input parameter
An error occurred in the DEVTYPE macro for
YKLOG01 or YKLOG02.
YKLOGnn
List of Messages 137