HP XP P9500 Manual page 10

Table 1 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YK80x) (continued)
Message ID
YK8026E CON
YK8027E CON
10 Messages
Message Text
IRXINIT module error:
code=return-code,
R0=abnormal-termination
-ode-and-reason-code
-or-abnormal-termination,
PARM7=reason-code.
IRXTERM module error:
code=return-code,
R0=abnormal-termination-code-and-
reason-code-for-
abnormal-termination.
Explanation and Recommended Actions
return-code
20: EXEC processing failed.
20021: There was an error in the parameter list that was passed
to IRXJCL.
The IRXINIT routine returned an error with the return code
identified by return-code. BCM Monitor will stop.
Check the return code.
return-code
20: Processing failed due to an error. Check the reason code
returned to PARM7 by IRXINIT.
100: Processing failed because the system abnormally terminated
while IRXINIT was checking the environment. The system might
output multiple messages reporting abnormal termination. R0
includes the abnormal termination code and the reason code
for abnormal termination.
abnormal-termination-code-and-
reason-code-for-abnormal-termination
IRXINIT returns the abnormal termination code
in the two trailing bytes of R0 and returns the
reason code for abnormal termination in the two
leading bytes of R0. If the reason code for
abnormal termination is larger than two bytes,
IRXINIT returns only the two trailing bytes for
the reason code for abnormal termination. For
details on the abnormal termination code and
reason code, see the MVS System Codes.
reason-code
For details about the reason code, see the
TSO/E REXX Reference.
The IRXTERM routine returned an error with the return code
identified by return-code. BCM Monitor will stop.
Check the return code.
return-code
For details about the return code, see the TSO/E
REXX Reference.
abnormal-termination-code-and-
reason-code-for-abnormal-termination
R0 includes the abnormal termination code and
the reason code for abnormal termination.
IRXTERM returns the abnormal termination code
in the two trailing bytes of R0 and returns the
reason code for abnormal termination in the two
leading bytes of R0. If the reason code for
abnormal termination is larger than two bytes,
IRXTERM returns only the two trailing bytes of
the reason code for abnormal termination. For
details about the abnormal termination code and
reason code, see the MVS System Codes.