HP XP P9500 Manual page 106

Table 32 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKY3x) (continued)
Message ID
YKY321I CON
YKY330I CON
106 Messages
Message Text
task-ID,COMMUNICATION TIMED
OUT
SOCKET API FAILURE
(maintenance-
information,request-type,
return-code,error-number)
Explanation and Recommended Actions
@ABORT: Forcibly releasing the
connection
@QUIT: Postprocessing
response-code
Code generated during the request
shown as request-name
event-code
Event that occurred during the
TCP/IP session
local-IP-address
IP address of the local host
local-port-number
Port number of the local host
connection-target-IP-address
IP address of the connection target
host
connection-target-port-number
Port number of the connection
target host
There is no response within the specified response
wait time. The connection will be released.
Check the cause of the response timeout.
task-ID
Number used to identify the
processing task that output the
message
The request shown as request-type resulted in an error
on the socket interface for IBM TCP/IP for MVS.
return-code and error-number indicate the error
information.
Check the cause of the error and take appropriate
action. If TCP/IP has stopped due to the error, stop
the Business Continuity Manager agent. Once the
error is corrected, start the TCP/IP program, and then
start the Business Continuity Manager agent.
maintenance-information
Detailed information used for error analysis
request-type
One of the following request types
is displayed:
"ACCEPT "
"BIND "
"CLOSE "
"INITAPI "
"IOCTL "