HP XP P9500 Manual page 87

Table 20 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKS2x)
Message ID
YKS203E TSO RC=52
YKS203E TSO RC=52
YKS250E MSG SC=36
RC=36
YKS260E MSG SC=44
RC=44
YKS270E MSG SC=44
RC=44
Message Text
Invoke YKSTORE REXX Script via
YKSTORE Assembler subroutine.
The MSG(stem) value cannot be
acquired in the caller's
environment. (YKVGET result =
result)
The value value of the variable
name is an invalid format.
Too long record:record.
Failed to operation
configuration file. (name
=dataset-name, dsstate)
Explanation and Recommended Actions
The YKSTORE REXX program can only be invoked via the
YKSTORE assembler REXX subroutine. This message
indicates the most likely cause of the error indicated in
the previous YKS203E message.
An attempt to acquire the variable value of the Message
structure failed with the result value identified by result.
This implies that the YKSTORE REXX subroutine has not
properly been invoked or that Business Continuity
Manager has not properly been installed.
stem
Stem name assigned to the MSG
parameter
The value value of the variable identified by name is
invalid.
An attempt to output record to a dataset failed because
record was too long.
Correct the variable setting so that the length of record
becomes 256 characters or shorter.
Creation of the configuration file is stopped because an
error occurred during the creation of the configuration
file. See the information output in the message to review
the environment, and then create the configuration file
again. For details about what action to take, see the
message that was output and the HP P9000 for Business
Continuity Manager Software User's Guide.
operation
The operation performed for the configuration file
CREATE
An error occurred during the creation of the
configuration file.
UPDATE
An error occurred during the update of the existing
configuration file.
dataset-name
Name of the configuration file to be
created
dsstate
Status of the configuration file
EXTENT=extent
The number of extents of the dataset
that is currently allocated
extent indicates the number of
extents that are allocated to the
dataset indicated by dataset-name.
DSORG=VSAM
The dataset format is VSAM. A
dataset whose format is VSAM
cannot be used as a configuration
List of Messages 87