HP XP P9500 Manual page 130

Table 37 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ21x – YKZ24x) (continued)
Message ID
Table 38 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ25x)
Message ID
YKZ250E MSG SC=40
RC=44
YKZ251E MSG SC=32
RC=32 (pair-index)
130 Messages
Message Text
Message Text
A NAME/TOKEN delete error
occurred. (return code=nnn, name=
name, cmd=xxx, pos=yyy)
DASD device
device-number- 1 (device-number-2)
management error, message-text.
(code1 code2, cmd=xxx, pos=yyy)
Explanation and Recommended Actions
#
If this message is output while the YKLOAD
command is being executed, the RC is 44.
Explanation and Recommended Actions
The command cannot be executed because a
NAME/TOKEN delete error occurred.
nnn (decimal number)
Return code from the
NAME/TOKEN registration routine
(IEANTCR)
name (string)
Name to be registered in the
NAME/TOKEN service
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
Business Continuity Manager failed to complete the
requested processing.
Processing will continue with this device skipped.
Check the status of the error device, correct any
errors related to the configuration or execution
conditions, and then re-execute the command.
device-number- 1 (string)
The device that issued I/O
device-number-2 (string)
The device to be manipulated
If the device number of the device
to be operated is not found, ****
is displayed.
message-text (string)
Message text
code1 (Hexadecimal number)
Subcommand code
code2 (Hexadecimal number)
Error code
For details about error codes, see
"Storage System Sense Byte
Information" (page 165).