HP XP P9500 Manual page 188

Table 54 Details of Error Codes 4Bxx (continued)
Error Error Details
Code
specified. The reason might be one
of the following:
The specified volume is not in a
Cnt Ac-S Z copy group with a
C/T group ID specified.
The specified volume is using the
Open/MF Consistency
Preservation Function.
The copy pair is in the SIMPLEX
status.
A copy pair cannot be created or
4B32
resynchronized because the
specified P-VOL satisfies one of the
following conditions:
The P-VOL is being used for
FlashCopy.
The P-VOL is being used for
FlashCopy SE.
The P-VOL is a TSE-VOL.
A path cannot be set because the
4B35
CU number for the specified MCU
is not supported.
A path cannot be set because the
4B36
port number for the specified MCU
is not supported.
A path cannot be set because the
4B37
port number for the specified RCU
is not supported.
A path cannot be set because the
4B38
CU number for the specified RCU is
not supported.
The remote command cannot be
4B49
executed because the path between
the specified storage system or CU
(SSID) and the command target
storage system is not set, or an error
has occurred on the path.
The following copy pairs cannot be
4B85
made because the specified volume
is a FlashCopy pair:
A Cnt Ac-S Z copy pair that
specified a C/T group
A TCA copy pair that specified
a C/T group
A Cnt Ac-S Z copy pair cannot be
4B86
made because the specified volume
is a FlashCopy pair and
differential-data management unit is
cylinder.
188 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z TCA
Not Output
output
Not output
Not output
Not output
Not output
Not output
Not Output
output
Not Output Not output
output
Cnt Ac-J Z CMD PATH
Not output
Output
Output
Output
Output
Output
Not output
Others
Not
output
Not
output
Not
output
Not
output