HP XP P9500 Manual page 85

Table 19 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKS0x)
Message ID
YKS001E TSO RC=48
YKS002E TSO RC=48
YKS003E TSO RC=52
YKS003E TSO RC=52
YKS004E MSG SC=48
RC=48
YKS005E MSG SC=48
RC=48
YKS006E MSG SC=48
RC=48
YKS079E MSG SC=44
RC=44 (result)
YKS085E MSG SC=44
RC=44
YKS086E MSG SC=44
RC=44 (file)
Message Text
Unable to execute without valid
MSG() parameter.
MSG(stem) does not include
trailing "."
Invoke YKSTORE REXX Script via
YKSTORE Assembler subroutine.
Unable to update MSG(stem) in
Caller's environment. YKVSET
result = result
Unable to execute without valid
STEM() parameter.
STEM(stem) does not include
trailing "." character.
Unable to execute without valid
PREFIX parameter.
YKVSET program failure for:
variable = value.
Error reported during file output.
EXECIO RC =n
File status is:DSSTATE
Explanation and Recommended Actions
Specify a valid MSG parameter.
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG
parameter
The YKSTORE REXX program can only be invoked via the
YKSTORE assembler REXX subroutine. This message
indicates the most likely cause of the error indicated in
the previous YKS003E message.
An attempt to assign a value to a variable of the Message
structure failed with the result value indicated by result.
This implies that the YKSTORE REXX subroutine has not
properly been invoked or that Business Continuity
Manager has not properly been installed.
stem
Stem name assigned to the MSG
parameter
Specify a valid STEM parameter.
The last character of the STEM parameter is not a period.
stem
Stem name assigned to the STEM
parameter
Specify a valid PREFIX parameter.
An attempt to assign the value value to the variable
variable failed with the result value identified by result.
This error can be caused by the YKSTORE REXX
subroutine's compiled REXX module being directly
executed.
Use the YKSTORE REXX subroutine instead of directly
executing the compiled REXX module.
Because the EXECIO TSO/E REXX command failed
(return code = n), the YKSTORE command is unavailable
for creating or updating the configuration file. For details,
see the TSO/E REXX User's Guide.
The input configuration file identified by file is unavailable.
DSSTATE
Status of the input configuration file
The following messages are output if the attribute of the
input configuration file is abnormal:
DSORG = XX. DSORG must be YY
The file is unavailable because the DSORG attribute
value is abnormal. Therefore, delete the current
List of Messages 85