HP XP P9500 Manual page 155

Table 44 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ40x) (continued)
Message ID
YKZ409E MSG SC=24
RC=24
Table 45 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ41x)
Message ID
YKZ410E MSG SC=36
#1
RC=36
Message Text
The timeout limit expired during the
wait for the reservation time of the
CAJ ATTIME suspension. (CT ID=ii,
R-JNL=jj, GENID=gg,
TIME=ATTIME-suspend-time)
Message Text
Copygroup SUPFnc does not support
CAJ Errorlevel.
Explanation and Recommended Actions
SS.NNNNNN: Second
The suspend processing started when the timeout
period elapsed because this period elapsed before
the journal of the ATTIME suspend times for the
ATTIME suspend function was acquired, or the
suspend processing started at the ATTIME suspend
time because the Cnt Ac-J Z copy pair was in the
suspend status at the ATTIME suspend time.
Check the following because the backup for the
specified time might not have been acquired:
Status of the Cnt Ac-J Z copy pair path
Value specified for the TIMEOUT parameter of
the YKSUSPND command
Status of the BC Z copy pair volumes (the Cnt Ac-J
Z consistency time and status during the
suspension)
Status of the Cnt Ac-J Z copy pair volumes
After checking the results, if necessary, use the
YKSUSPND command to cancel the ATTIME suspend
information, and then re-acquire the backup.
ii (hexadecimal number)
C/T group ID for BC Z (00-7F)
jj (hexadecimal number)
Journal group number specified for the sub C/T
group ID for the Cnt Ac-J Z that links with BC Z.
gg (hexadecimal number)
Generation ID (00-FF)
ATTIME-suspend-time (GMT)
ATTIME suspend time:
YYYYMMDD-HH:MM:SS.NNNNNN
YYYY: Year
MM: Month
DD: Day
HH: Hour
MM: Minute
SS.NNNNNN: Second
Explanation and Recommended Actions
You cannot use the Errorlevel attribute for this
storage system.
#2
In this case, use a device
Errorlevel attribute for Cnt Ac-J Z. Also, if a scan
was not performed after the storage system
microcode was replaced, perform another scan.
SUPFnc (hexadecimal number)
Value for the version of the
storage system support function
that supports the
List of Messages 155