HP XP P9500 Manual page 100

Table 29 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKX2x) (continued)
Message ID
YKX208E MSG SC=48
YKX208E MSG SC=48
YKX210E TSO RC=40
YKX266E MSG SC=48
YKX299I TSO
Table 30 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKY0x)
Message ID
YKY001I CON
YKY002I CON
YKY003I CON
YKY005I CON
100 Messages
Message Text
CU() not valid hex
DEVN() not valid hex
REXX failure return code=nnnn
starting with variable name
Necessary Route List is not found.
YKQRYDEV command return
code=nnnn, reason code=rrrr
Message Text
AGENT STARTED (vv-rr[-zz])
INVALID INITIALIZATION
PARAMETER: parameter-name
INVALID CONTINUATION LINE
FOUND. PARAMETER SCAN
TERMINATED
AGENT INITIALIZATION FAILED
P=termination-code
Explanation and Recommended Actions
The value specified in the CU parameter is not in
hexadecimal format.
The value specified in the DEVN parameter is not in
hexadecimal format.
Access to the REXX variable identified by name failed.
For details about the return code, see IKJCT441 in the
TSO/E Programming Services.
nnnn
Error code returned upon REXX
access
The route list to be processed was not found.
Review the ROUTE and DAD parameters, route list
definition file, and command device definition file you
specified when executing the YKLOAD command.
The YKQRYDEV command terminated with the return
code nnnn and the reason code rrrr.
Explanation and Recommended Actions
The Business Continuity Manager agent has started.
vv
Version number
rr
Revision number
zz
Exception
The specified parameter has not been defined in the
initialization parameters, or the initialization
parameter shown as parameter-name is invalid. The
Business Continuity Manager agent has been
terminated.
Correct the initialization parameters and then restart
the Business Continuity Manager agent.
The initialization parameters contain the specification
for a continuation line, but no parameter is continued.
The Business Continuity Manager agent will be
terminated.
Correct the initialization parameters and then restart
the Business Continuity Manager agent.
The Business Continuity Manager agent cannot start
for the reason indicated in the message that was
displayed before this message.
Contact the center administrator. The center
administrator must take appropriate action for the