HP XP P9500 Manual page 166

Table 47 Details of Error Codes 20xx – 22xx (continued)
Error Error Details
Code
the specified BC Z copy pair does not
meet all of the following conditions:
The S-VOL is part of a delta resync
pair
The delta resync pair is in the
HOLD status
A Cnt Ac-J Z copy pair that is
linked with the delta resync pair is
in the suspend status
The BC Z copy pair could not be
2079
made because the specified S-VOL of
BC Z copy pair is a part of a delta
resync pair.
A BC Z copy pair cannot be
2089
resynchronized (QuickRestore)
because the P-VOL of the specified
BC Z copy pair is being quick
formatted.
A BC Z copy pair cannot be
208A
resynchronized (QuickRestore)
because the S-VOL of the specified
BC Z copy pair is being quick
formatted.
A BC Z copy pair cannot be
2093
suspended if the following two
conditions exist:
The P-VOL of the specified BC Z
copy pair is the S-VOL of a TCA.
A TCA copy pair is not in the
Suspend status.
When the P-VOL of the specified BC
2094
Z copy pair is the S-VOL of a TCA,
the BC Z copy pair cannot be
suspended for one of the following
reasons:
The consistency time of the TCA
copy pair is not the latest time.
The TCA copy pair changed to
Suspend status while it was in
Pending status, and the consistency
time was disabled.
The BC Z copy pair cannot be
2097
resynchronized (QuickRestore)
because the copy pair is made up of
a THP Z volume and a non-THP Z
volume.
A copy pair could not be created
20A2
because the THP Z volume specified
for the P-VOL of the BC Z pair is being
expanded.
A copy pair could not be created
20A3
because the THP Z volume specified
166 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z TCA
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Cnt Ac-J Z CMD PATH Others