HP XP P9500 Manual page 51

Table 8 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKG2x) (continued)
Message ID Message Text
YKJ152E TSO Failed to operate csv file:
RC=40 dd-name: dsstate
YKJ200E TSO name is not specified in Pair
RC=32 information CSV file:
dd-name: rec#
YKJ201E TSO The value value of name in
RC=32 Pair information CSV file is
invalid: dd-name: rec#
Explanation and Recommended Actions
DD name of the CSV file where the error was
detected
The CSV file operation will stop because an error occurred when
using the CSV file.
See the information output in the message to review the
environment, and then update the CSV file again. For details about
troubleshooting, see the accompanying message and the HP P9000
for Business Continuity Manager Software User Guide.
dd-name
DD name of the CSV file where the error was
detected
dsstate
CSV file status
EXTENT= extent
The number of extents of the dataset that is
currently allocated
extent indicates the number of extents that are
allocated to the dataset indicated by dd-name.
CANNOT GET DSSTATE, reason code= nnnn
The dataset information cannot be obtained, or
the CSV file is not allocated. nnnn (decimal (base
10) number) indicates a reason code
(maintenance information).
The item identified by name is not included in the pair information
CSV file.
name
Name of the item in the pair information CSV
file
dd-name
DD name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by
dd-name where the error was detected
The value assigned to name in the pair information CSV file is in
an invalid format.
value
Value assigned to the item identified by name
name
Name of the item in the pair information CSV
file
dd-name
DD name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by
dd-name where the error was detected
List of Messages 51