HP XP P9500 Manual page 68

Hp p9000 for business continuity manager software messages
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 10 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKL2x) (continued)
Message ID
YKL419E MSG
SC=48 RC=48
Table 1 1 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKM0x)
Message ID
YKM000T TSO
RC=48
YKM001E TSO
RC=48
YKM001E MSG
SC=48 RC=48
YKM002E MSG
SC=48 RC=48
YKM002E MSG
SC=48
YKM002E TSO
68
Messages
Message Text
The values of attribute1 and
attribute2 conflict.
Message Text
Supplied parameters invalid
No message MSG() supplied
No results STEM() supplied
Copy Group STEM(stem) does
not include trailing "."
DEVN() value invalid
Messages MSG(stem) does
not include trailing "."
Explanation and Recommended Actions
If no other error message was output, collect the following materials
and contact service representative:
The script from which this command was executed (not
necessary if this command was executed from the ISPF panel).
The ISPF log (not necessary if this command was executed from
a script).
The definition files operated on from the script or ISPF panel
(the copy group definition file, disk configuration definition file,
command device definition file and route list definition file).
CLI-name
The name of the executed CLI command
detailed-info
Detailed information to assist service
representative in resolving the problem
The values attribute1 and attribute2 conflict.
Make sure that both of these values are valid, and then retry the
operation.
attribute1
Attribute name 1 included in the copy group
definition
attribute2
Attribute name 2 included in the copy group
definition
Explanation and Recommended Actions
Invalid parameters are specified.
For details, see the reason code in the YKM099I message that
will appear after this message. For reason codes, see IKJPARS
in the TSO/E Programming Services.
Nothing is assigned to the MSG parameter.
Nothing is assigned to the STEM parameter.
The last character of the STEM parameter is not a period.
stem
Stem name assigned to the STEM parameter
The value assigned to the DEVN parameter is invalid.
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG parameter

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000 for business continuity manager 6.6.1

Table of Contents