HP XP P9500 Manual page 199

Table 57 Details of Error Codes 8Dxx (continued)
Error Error Details
Code
The status is invalid.
The status of the copy pair is
being changed.
A BC Z copy pair cannot be
8D2A
suspended. Possible reasons
include one or more of the
following:
The status of the copy pair does
not allow the status transition.
For details, see error code
2310.
The copy pair is in the
SIMPLEX status.
The copy pair is in the Split
status.
The specified C/T group ID is
not registered.
The serial numbers for the primary
8D2C
and the secondary storage systems
in the host command parameter is
incorrect.
The host command parameter is
8D30
incorrect.
Multiple BC Z copy pairs cannot
8D31
be suspended because there is a
copy pair that does not allow the
status transition in the specified
copy pairs.
The command could not be
8D38
executed because the specified
volume is not in the SIMPLEX
status.
A command device cannot be
8D39
defined because it differs from the
APID that was already registered.
A command device cannot be
8D3A
defined because the specified APID
is in use by another DEV.
A command device cannot be
8D3D
deleted because the specified
volume is not a command device.
A command device cannot be
8D3E
made because the specified CU
number is not supported.
The command cannot be executed
8D41
because the volume specified as
the command device is already
part of a copy pair, or is a journal
volume.
Type of Error
BC Z Cnt Ac-S Z
Output Not output
Not output
Not output
Output Not output
Not output
Not output
Not output
Not output
Not output
Not output
TCA Cnt Ac-J Z CMD
Output
Output
Output
Output
Output
Output
Details of Error Codes 199
PATH Others
Output
Output
Not output
Not output
Not output
Not output
Not output
Not output