HP XP P9500 Manual page 80

Table 16 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKP0x)
Message ID
YKP000T TSO RC=48
YKP001E TSO RC=48
YKP001E MSG SC=48
RC=48
YKP002E MSG SC=48
RC=48
YKP002E TSO RC=48
YKP002E MSG SC=48
RC=48
YKP003E MSG SC=48
RC=48
YKP010E TSO RC=40
YKP065E MSG SC=36
RC=36
YKP099I TSO
80 Messages
Message Text
Supplied parameters invalid
No message MSG() supplied
No results STEM() supplied
Copy Group STEM(stem) does
not include trailing "."
Messages MSG(stem) does not
include trailing "."
This command is only valid for
TCA or CAJ Copy Groups
Some storage systems in this
Copy Group do not support
TCA statistics reports
REXX failure return code=nnnn
starting with variable name
The storage system
(serial-number) pairs with more
than 4 storage systems.
YKSTATS command return
code=nnnn, reason code=rrrr
Explanation and Recommended Actions
Invalid parameters are specified.
For details, see the reason code in the YKP099I message
that will appear after this message. For reason codes, see
IKJPARS in the TSO/E Programming Services.
Nothing is assigned to the MSG parameter.
Nothing is assigned to the STEM parameter.
The last character of the STEM parameter is not a period.
stem
Stem name assigned to the STEM
parameter
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG parameter
The YKSTATS command was executed on a copy group that
is neither TCA nor Cnt Ac-J Z. This command works only on
TCA or Cnt Ac-J Z copy groups.
Check that the command can be executed on this copy group,
and then re-execute the command.
The TCA copy group on which the YKSTATS command has
been executed contains an unsupported IFType.
Check that the command can be executed on this copy group,
and then re-execute the command.
Access to the REXX variable indicated by name failed.
For details about the return code, see IKJCT441 in the TSO/E
Programming Services.
nnnn
Error code for REXX access
The storage system identified by serial-number is paired with
more than four storage systems within the C/T group.
Correct the copy pair configuration within the C/T group.
serial-number
storage system serial number (12 digits)
The YKSTATS command terminated with the return code nnnn
and the reason code rrrr.
This message is always displayed to indicate the return code
and the reason code.
nnnn
Maximum among the severity codes
returned during command execution