HP XP P9500 Manual page 79

Table 14 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKM9x) (continued)
Message ID Message Text
YKM905E TSO A GETMAIN error occurred.
YKM906E TSO A FREEMAIN error occurred.
Table 15 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKN0x)
Message ID Message Text
YKN000T TSO Supplied parameters invalid
RC=48
YKN001E TSO No message MSG() supplied
RC=48
YKN001E MSG No results STEM() supplied
SC=48 RC=48
YKN002E MSG Copy Group STEM(stem) does
SC=48 RC=48 not include trailing "."
YKN002E TSO Messages MSG(stem) does not
RC=48 include trailing "."
YKN010E TSO REXX failure return code=nnnn
RC=40 starting with variable name
YKN050E MSG Invalid Copy Group attribute
SC=48 RC=48 name
(attribute-value)
YKN099I TSO YKRUN command return
code=nnnn, reason code=rrrr
Explanation and Recommended Actions
A GETMAIN error occurred. The program will stop running.
Contact technical support for assistance.
A FREEMAIN error occurred. However, the program will
continue to run.
Contact technical support for assistance.
Explanation and Recommended Actions
Invalid parameters are specified.
For details, see the reason code in the YKN099I message that
will appear after this message. For reason codes, see IKJPARS
in the TSO/E Programming Services.
Nothing is assigned to the MSG parameter.
Nothing is assigned to the STEM parameter.
The last character of the STEM parameter is not a period.
stem
Stem name assigned to the STEM parameter
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG parameter
Access to the REXX variable identified by name failed.
For details about the return code, see IKJCT441 in the TSO/E
Programming Services.
nnnn
Error code returned upon REXX access
The specified copy group attribute value is invalid for this
command.
Correct the value and then re-execute the command.
name
REXX variable name
attribute-value
REXX variable value
The YKRUN command terminated with the return code nnnn
and the reason code rrrr.
This message is always displayed to indicate the return code
and the reason code.
nnnn
Maximum among the severity codes
returned during command execution
List of Messages 79