HP XP P9500 Manual page 127

Table 37 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ21x – YKZ24x) (continued)
Message ID
YKZ231E MSG SC=44
RC=44
YKZ232T MSG SC=36
RC=44
YKZ233E MSG SC=36
#
RC=36 (attribute-value)
YKZ234E MSG SC=36
#
RC=36
Message Text
Necessary Routelist or DEVN
information is not found.
Number of Copy Groups value
invalid.
Invalid Copy Group attribute name
Storage system model value null or
invalid
Explanation and Recommended Actions
Change the status of the copy pairs to a status that
allows this command to be executed.
device#
Device number
If the device cannot be identified,
**** is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified,
** is displayed.
CCA#
Command control address number
If the device cannot be identified,
** is displayed.
pair-index
See the pair index description in
the explanation of the YKE003E
message.
The route list or device number information is missing
although it is required for processing to continue.
Correct the value assigned to the ROUTE or DAD
parameter passed to the YKLOAD command.
The number of copy groups is invalid.
Correct the content of the configuration file.
value
Number of copy groups
The specified copy group attribute value is invalid
for this command.
Correct the configuration file, and then re-execute
the YKLOAD command.
name
REXX variable name
attribute-value
REXX variable value
#
If this message is output while the YKLOAD
command is being executed, the RC is 44.
The storage system model value is NULL or invalid.
Correct the storage system model in the configuration
file, and then re-execute the command.
value
List of Messages 127