HP XP P9500 Manual page 61

Table 9 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKL0x) (continued)
Message ID Message Text
YKL082W MSG Unable to resolve secondary
SC=8 RC=8 device address.
(pair-index)
YKL083W MSG Unable to resolve volume
SC=12 RC=12 serial number.
(pair-index)
YKL085E MSG Unable to read configuration
SC=40 RC=40 (file) file.
YKL087E MSG The license information
SC=40 RC=40 (file) dataset could not be read.
YKL088E MSG File Open error: dsstate.
SC=40 RC=40 (file)
YKL089E MSG File Close error: dsstate.
SC=40 RC=40 (file)
Explanation and Recommended Actions
The YKLOAD program failed to resolve the unit number (device
address) of the S-VOL in the specified CopyPair. For configuration
definition, this process uses the Host Discovered Array object in
the secondary device address domain. For other purposes, the
current host device address domain is used. The situation
represented by this message is not always fatal. Many CLI
commands can be successfully executed by using only the P-VOL
unit address.
pair-index
See the pair index description in the
explanation of the YKE003E message.
The YKLOAD program failed to resolve the volume serial number
of the P-VOL in the specified CopyPair. For configuration definition,
this process uses the Host Discovered Array object in the primary
device address domain. For other purposes, the current host device
address domain is used. The situation represented by this message
is not always fatal. At present, the volume serial number is used
only for display and warning.
pair-index
See the pair index description in the
explanation of the YKE003E message.
The configuration file could not be read, because the record length
is too long.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file file where the
error was detected
An attempt to read the license information dataset has failed.
Check that the dataset name of the license key dataset is correct,
and that the license key dataset was created correctly. If necessary,
transfer the license key file again and recreate the license key
dataset.
An attempt to open the XML file identified by file failed.
dsstate
Status of the input XML
file
file Name of the XML file where the error was
detected
An attempt to close the XML file identified by file failed.
dsstate
Status of the input XML
file
file Name of the XML file where the error was
detected
List of Messages 61