HP XP P9500 Manual page 189

Table 54 Details of Error Codes 4Bxx (continued)
Error Error Details
Code
A TCA copy pair cannot be made
4BA9
because the specified CTID is not
registered in the storage system.
No timestamp transfer mode Cnt
4BB1
Ac-S Z copy pair can be made
because the specified volume is not
a Cnt Ac-S Z copy pair.
A timestamp transfer mode Cnt Ac-S
4BB2
Z copy pair cannot be made
because the specified volume is an
XRC pair.
A Cnt Ac-S Z copy pair
4BD1
resynchronization that makes it
possible to use the Open/MF
Consistency Preservation Function
cannot be performed because the
specified C/T group ID is invalid.
A Cnt Ac-S Z copy pair cannot be
4BD2
made and resynchronized because
the specified volume does not
support the Open/MF Consistency
Preservation Function.
Table 55 Details of Error Codes 50xx – 6Axx
Error Error Details
Code
The command device cannot be
501C
defined because the specified
volume is a journal volume.
Alternatively, a Cnt Ac-J Z copy
pair cannot be made.
A command device cannot be
64E2
deleted because the APID differs
from the defined APID.
The remote DKC control function
64E3
cannot be executed because the
command device is not set.
A command device cannot be
64E8
defined because the specified CU
number is not supported.
The paths between CUs, which
64EA
contain command devices, are not
set.
The command device cannot be
64FB
defined. The reason might be one
of the following:
The corresponding volume does
not exist.
The corresponding volume is a
system residence volume.
Type of Error
BC Z Cnt Ac-S Z
Not output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Type of Error
BC Z Cnt Ac-S Z
Not output
Not output
Not output
Not output
Not output
Not output
TCA Cnt Ac-J Z CMD
Output Not output
Not output
Not output
Not output
Not output
TCA Cnt Ac-J Z CMD
Output Not output
Output
Output
Output
Output
Output
Details of Error Codes 189
PATH Others
PATH Others
Not output
Not output
Not output
Not output
Not output