HP XP P9500 Manual page 42

Table 7 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKG0x) (continued)
Message ID
YKG092E MSG
SC=40 RC=40
(file)
YKG099I MSG
TSO
Table 8 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKG2x)
Message ID
YKG201E MSG
SC=48 RC=48
YKG202E TSO
RC=48
YKG203E MSG
SC=48 RC=48
YKG204E TSO
RC=48
YKG205E MSG
SC=48 RC=48
YKG241W MSG
SC=4 RC=4
(file:rec#)
YKG250E MSG
SC=36 RC=36
(file:rec#)
42 Messages
Message Text
File Read error: dsstate.
YKGETHDA command return
code=max-value,reason
code=reason-code.
Message Text
Unable to execute without
valid name parameter.
"SYSAUTH". cannot be
specified in MSG()
parameter.
"SYSAUTH." cannot be
specified in STEM()
parameter.
name parameter is too long.
name parameter is too long.
The attribute attname is
already defined.
The value value of the
attribute name is an invalid
format.
Explanation and Recommended Actions
An attempt to read the XML file identified by file failed.
dsstate
Status of the input XML file
file
Name of the XML file where the error was
detected
The reading of the disk configuration definition file has finished.
This message is issued when an invalid disk configuration definition
file is read in ISPF. If this message cannot be output to the REXX
structure, it is output to the TSO/E terminal.
reasoncode
Reason code for the returned max-value
max-value
Maximum value among the output return codes
Explanation and Recommended Actions
Nothing or an invalid value is assigned to the parameter identified
by name.
SYSAUTH. cannot be specified in the MSG parameter. Specify a
different name.
SYSAUTH. cannot be specified for the STEM parameter. Specify
a different name.
The parameter identified by name is too long.
The parameter identified by name is too long.
The XML attribute identified by attname has already been defined.
Review the file name identified by file and the attname value on
the line with the line number identified by rec#.
attname
XML attribute name
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
The value value of the XML attribute name is in an invalid format.
Correct the specification on the line with the line number identified
by rec# in the file identified by file.