HP XP P9500 Manual page 90

Table 22 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKT2x)
Message ID
YKT210E CON RC=8
YKT21 1E CON RC=12
YKT212E CON RC=12
YKT213E CON RC=4
YKT219E CON RC=16
YKT220E CON RC=8
YKT221E CON RC=4
YKT222E CON RC=4
YKT223E CON RC=4
YKT226E CON RC=4
YKT230E CON RC=4
90 Messages
Message Text
System task started without START
from TSO.
Failed to allocate space in CSA
Couldn't register Name/Token
Couldn't take Name/Token
Processing ended abnormally
Unknown keyword is specified
Specified HOST ID is invalid
Specified YKLCNSE is invalid
Specified LOGPUT is invalid
The specified SYSLOG value is
invalid.
The specified YKLCNS2 value is
invalid.
Explanation and Recommended Actions
The command was invoked from the TSO/E
environment. The program stops processing.
Invoke the command using the START command, or
as a batch JOB.
A GETMAIN error occurred in CSA. The program stops
processing.
Contact technical support for assistance.
An error occurred during Name/Token registration.
The program stops processing.
Contact technical support for assistance.
An error occurred during acquisition of Name/Token.
The program stops processing.
Contact technical support for assistance.
Processing terminated abnormally before completion.
The program stops processing.
Contact technical support for assistance.
The specified keyword is unknown. The program stops
processing.
Specify a valid keyword and then re-execute the
command.
The value assigned to the YKCMDIF parameter is
invalid. The program ignores the specification and
continues processing.
In HOST ID, you can either omit specification (Delete)
or specify a hexadecimal value (two characters)
between 00 and 1F. Specify a correct value and retry
the process.
The value assigned to the YKLCNSE parameter is
invalid. The program ignores the specification and
continues processing.
You can specify a character string containing up to
eight characters. Specify a correct value and retry the
process.
The value assigned to the LOGPUT parameter is invalid.
The program ignores the specification and continues
processing.
Valid values are either LOGR or SAM. Specify a valid
value and retry the process.
The value specified for the SYSLOG parameter is
invalid. The program ignores the specification and
continues processing.
Valid values are either YES or NO. Specify a valid value
and retry the process.
The value specified for the YKLCNS2 parameter is
invalid. The program will ignore the specification and
continue processing.