HP XP P9500 Manual page 214

Table 62 Details of Error Codes C3xx (continued)
Error Error Details
Code
Formatting of the logical volume is
C31D
being performed on the P-VOL.
The P-VOL is in the READ ONLY
C31E
status.
The logical path between the MCU
C320
and the RCU is not set (number of
path = 0).
The condition setting for the number
C321
of the Minimum Path between the
MCU and the RCU is invalid.
The MCU is a storage system type
C322
that is not supported by Cnt Ac-S
Z or TCA.
The RCU sequence (number, SSID
C324
or CU) is incorrect.
The RCU is not NVS ON.
C325
The subsystem level cache of the
C326
RCU is not valid.
A copy pair cannot be made
C327
because the status of the P-VOL
does not permit remote copy.
The track format of the P-VOL and
C328
S-VOL do not match.
The S-VOL is protected by LDEV
C32A
security.
The P-VOL is protected by LDEV
C32B
security.
The S-VOL is protected by LDEV
C32C
guard.
A copy pair cannot be made
C32E
because connection with the
specified S-VOL is not supported.
The condition for the number of
C32F
cylinders for Cnt Ac-S Z or TCA
volumes is incorrect (the number of
cylinders in the P-VOL > the number
of cylinders in the S-VOL).
The condition for the Cnt Ac-S Z or
C330
TCA volume capacity is incorrect
(not P-VOL=S-VOL).
The device level cache of the S-VOL
C332
is not valid.
The S-VOL is not DFW ON.
C333
The S-VOL is a TCA P-VOL.
C335
214 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z TCA
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Cnt Ac-J Z CMD PATH
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Others