HP XP P9500 Manual page 134

Table 38 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ25x) (continued)
Message ID
YKZ256E MSG SC=8
RC=8
YKZ257E MSG SC=32
RC=32 (pair-index)
134 Messages
Message Text
DASD device
device-number- 1 (device-number-2)
sense: diagnostic-information
(cmd=xxx, pos=yyy)
DASD device
device-number- 1 (device-number-2)
management error. (Message type:
code1 Reason code: code2 Error
code: code3 code4, cmd=xxx,
pos=yyy)
Explanation and Recommended Actions
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
pair-index
See the pair index description in
the explanation of the YKE003E
message.
Detailed information on the I/O error is displayed.
device-number- 1 (string)
The device that issued I/O
device-number-2 (string)
The device to be manipulated
diagnostic-information (Hexadecimal number)
Sense byte information
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
Business Continuity Manager failed to complete the
requested processing. Processing will continue with
this device skipped.
Check the status of the device involving the error,
correct any errors related to the configuration or
execution conditions, and then re-execute the
command.
device-number- 1 (string)
The device that issued I/O
device-number-2 (string)
The device to be manipulated
If the device number of the device
to be operated is not found, ****
is displayed.
code1 (Hexadecimal number)
Message type
code2 (Hexadecimal number)
Reason code
code3 (Hexadecimal number)