HP XP P9500 Manual page 95

Table 25 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKV0x) (continued)
Message ID
YKV050E MSG SC=36
RC=48 (attribute-value)
YKV058E MSG SC=36
RC=48
YKV099I TSO
Table 26 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKW0x)
Message ID
YKW001W TSO
YKW002E TSO
YKW003E TSO
YKW006E TSO
Message Text
Invalid Copy Group attribute
name
Some pairs in this group do not
support TCA services.
YKRECVER command return
code=nnnn, reason code=rrrr
Message Text
Timeout limit has expired without
group copy-group reaching state
state.
Primary Devices OFFLINE. Unable
to receive IEA494I messages.
Unexpected transition of group
copy-group pair index device
xxxx to state state.
YKLOAD error return code =
nnnn
Explanation and Recommended Actions
The specified copy group attribute value is invalid for
this command.
Correct the value and then re-execute the command.
name
REXX variable name
attribute-value
REXX variable value
One or more devices in the HP XP 256 Disk Array
storage system do not support TCA copy groups.
Check that the command can be executed on this copy
group, and then re-execute the command.
The YKRECVER command terminated with the return
code nnnn and the reason code rrrr.
This message is always displayed to indicate the return
code and the reason code.
nnnn
Maximum among the severity codes
returned during command execution
Explanation and Recommended Actions
The specified copy group copy-group did not reach the
requested status state within the specified time limit.
Because the specified copy group contains a copy pair
whose P-VOL is offline, the IEA494I message is not
issued.
Make all P-VOLs within the specified copy group online,
and then re-execute the command.
One or more copy pairs identified by index within the
specified copy group copy group entered a status
identified by state that does not lead to the requested
GOTO status. It is probable that this status transition was
triggered manually.
Conduct an investigation using the ISPF panel
interface's monitor function.
The YKWATCH command uses the YKLOAD command
to obtain the copy group configuration. An error
occurred during execution of the YKLOAD command.
Conduct an investigation using the ISPF panel
interface's load function.
nnnn
Return code of YKLOAD command
For details, see the description for
the YKLOAD command in the HP
List of Messages 95