HP XP P9500 Manual page 133

Table 38 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ25x) (continued)
Message ID
YKZ255E MSG SC=32
RC=32 (pair-index)
Message Text
DASD device
device-number- 1 (device-number-2)
sense: diagnostic-information
(cmd=xxx, pos=yyy)
Explanation and Recommended Actions
The corresponding device might not be configured
or connected.
When CC=0 and CSW=xxxxxx0000xxxx (DSB=00,
CSB=00):
The corresponding device might not be configured
or connected.
When CC=0 and CSW=00000000060000:
MIH might have occurred or a logical path might not
be connected.
device-number- 1 (string)
The device that issued I/O
device-number-2 (string)
The device to be manipulated
code1 (decimal number)
CC information
code2 (Hexadecimal number)
CSW Information.
code3 (Hexadecimal number)
Subcommand code
code4 (Hexadecimal number)
Completion code
code5 (Hexadecimal number)
Detailed code
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
See the command code
description in the explanation of
the YKZ201E message.
yyy (string)
Maintenance information
Detailed information on the I/O error is displayed.
device-number- 1 (string)
The device that issued I/O
device-number-2 (string)
The device to be manipulated
If the device number of the device to be operated is
not found, **** is displayed.
diagnostic-information (Hexadecimal number)
Sense byte information
xxx (decimal number)
Command code of the command
that was executing when the error
occurred
List of Messages 133