HP XP P9500 Manual page 167

Table 47 Details of Error Codes 20xx – 22xx (continued)
Error Error Details
Code
for the S-VOL of the BC Z pair is
being expanded.
A copy pair could not be created
20B4
because the THP Z volume specified
for the P-VOL of the BC Z copy pair
is not assigned to the pool.
A copy pair could not be created
20B5
because the THP Z volume specified
for the S-VOL of the BC Z copy pair
is not assigned to the pool.
A copy pair could not be created
20BD
because the P-VOL of the specified
BC Z copy pair is an emulation type
(3390-V) that is not supported.
A copy pair could not be created
20BE
because the S-VOL of the specified
BC Z copy pair is an emulation type
(3390-V) that is not supported.
If the emulation type of the P-VOL of
20C9
the specified BC Z copy pair is
3390-A, a copy pair could not be
created for one of the following
reasons:
No mainframe Fibre Channel
adapter is installed.
All of the mainframe Fibre Channel
adapters are blocked.
If the emulation type of the S-VOL of
20CA
the specified BC Z copy pair is
3390-A, a copy pair could not be
created for one of the following
reasons:
No mainframe Fibre Channel
adapter is installed.
All of the mainframe Fibre Channel
adapters are blocked.
A copy pair could not be created
20D0
because the pool of the THP Z volume
specified for the P-VOL of the BC Z
copy pair is being initialized.
A copy pair could not be created
20D1
because the pool of the THP Z volume
specified for the S-VOL of the BC Z
copy pair is being initialized.
A copy pair could not be created for
20D6
one of the following reasons:
The P-VOL of the specified BC Z
copy pair is being used for
Compatible FlashCopy.
The P-VOL of the specified BC Z
copy pair is a TSE-VOL.
Type of Error
BC Z Cnt Ac-S Z TCA
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Cnt Ac-J Z CMD PATH
Details of Error Codes
Others
167