HP XP P9500 Manual page 75

Table 13 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKM7x) (continued)
Message ID Message Text
YKM707E ISPF Enter the number (hex.
characters: 0-9, A-F, a-f) to
search for.
YKM708E ISPF Enter the number (numerical
characters: 0-9) to search for.
YKM709E ISPF Execute the sort command
before executing the locate
command.
YKM710E ISPF Enter one of the following
characters (P, S, N/A) to
search for.
YKM720E ISPF Required parameter is not
specified.
YKM721E ISPF Invalid field name is specified.
YKM722E ISPF Invalid pattern is specified.
YKM723E ISPF Invalid action name is
specified.
YKM724E ISPF The length of the "field-name"
field data must be no more
than value-length.
YKM725E ISPF Enter the number (hex.
characters: 0-9, A-F, a-f).
YKM726E ISPF Enter the number (numerical
characters: 0-9).
YKM727E ISPF Range specification is not
supported for the field.
YKM728E ISPF The specified pattern produced
no matching lines.
YKM731E ISPF service error occurred.
info
Explanation and Recommended Actions
loclen
Input length
Enter the hexadecimal characters (0-9, A-F, a-f) that you want
to search for.
Enter the numeric values (0-9) that you want to search for.
Execute the SORT command before executing the LOCATE
command.
Enter the character you want to search for (P, S, or N/A.
Enter the required parameters.
Enter the name of the field that specifies the condition.
Specify correct values for the pattern parameter. Make sure that
none of the following conditions exist:
A value greater than value 1 was specified for value 2, as
the range specification condition.
NULL was specified for value 1, as the range specification
condition.
A value containing an asterisk (*) was specified for value 1
or value 2, as the range specification condition.
The specified value contained two or more asterisks.
An asterisk (*) was specified in a location other than before
or after the value.
Enter the valid action name.
The length of the input entered into the field-name field must be
equal to or less than value-length.
field-name
Field name
value-length
Input length
Enter the hexadecimal characters (0-9, A-F, a-f).
Enter a numeric value (0-9).
A range cannot be specified for the field.
A line that matches the specified pattern was not found.
An error occurred in the ISPF service.
info
List of Messages 75