When Handling Intermediate Volumes Managed By Hitachi Rapidxchange; Cluster Software Supported By Hdlm - Hitachi XP P9500 User Manual

When Handling Intermediate Volumes Managed by Hitachi RapidXchange

When you exchange data by using intermediate volumes managed by Hitachi
RapidXchange, the following version of File Access Library and File Conversion
Utility (FAL/FCU) is required:
• For Lightning 9900V Series
01-03-56/20 or later
• Hitachi USP
01-04-64/21 or later
For details on Hitachi RapidXchange, see the manual Reference Manual / File
Conversion Utility & File Access Library.

Cluster Software Supported by HDLM

Table 3-2 Supported cluster software versions on page 3-5
software versions supported by HDLM when building a cluster configuration.
Cluster software
#3
VCS
Sun Cluster
Oracle RAC
#1
An environment with a boot disk located on the host.
#2
An environment with a boot disk located in a storage system instead of in
the host.
#3
The DiskReservation agent of the VCS is not supported.
#4
You must apply MP2 or later when using the I/O fencing function. The I/O
fencing function can be used only when Hitachi USP, Universal Storage
Platform V/VM, or Virtual Storage Platform storage systems are connected
in a Solaris 9 environment. Note that the only supported service group
type is the failover service group. The parallel service group and hybrid
service group are not supported.
#5
You must apply MP1 or later when using the I/O fencing function. The I/O
fencing function can be used only when Hitachi USP, Universal Storage
Table 3-2 Supported cluster software versions
Local boot disk environment
#4
VCS4.1 , or VCS5.0
Sun Cluster 3.1, Sun Cluster 3.2,
#6
or Oracle Solaris Cluster 3.3
Oracle9i RAC, Oracle RAC 10g, or
#7
Oracle RAC 11g
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Supported versions
#1
Boot disk environment
#5
VCS 4.1
Sun Cluster 3.1 8/05 (Update
4)
--
lists the cluster
#2
#4 #5
or VCS5.0
3-5