Hbas; When Using Intermediate Volumes Managed By Hitachi Rapidxchange To Exchange Data - Hitachi XP P9500 User Manual

Legend:
Y: Usable
--: Not usable
FC I/F: FC Interface
iSCSI I/F: iSCSI Interface
#1
Dual controller configuration is required.
#2
The evaluation of EMC DMX3000 has been completed. Response to
inquiries for other systems of the EMC DMX series must be the same as
that of the EMC DMX3000. When using systems of the EMC DMX series
other than the EMC DMX3000, evaluate the connection in advance.
#3
SP1 or later must be installed.
#4
The evaluation of EMC CX700 has been completed. Response to inquiries
for other systems of the EMC CX series must be the same as that of the
EMC CX700. When using systems of the EMC CX series other than the
EMC CX700, evaluate the connection in advance.
Note that, for Windows Server 2003, EMC CX700 was used for
evaluations. For Windows Server 2008, EMC CX3-10 was used.
#5
The evaluation of HP EVA8000 has been completed. Response to inquiries
for other systems of the HP EVA series must be the same as that of the
HP EVA8000. When using HP EVA systems other than the HP EVA8000,
evaluate the connection in advance.

HBAs

For details about the supported HBAs, see the HDLM Release Notes.
When Using Intermediate Volumes Managed by Hitachi RapidXchange to
Exchange Data
Table 3-4 Related Programs When Intermediate Volumes Managed by Hitachi
RapidXchange Are Used to Exchange Data on page
programs when intermediate volumes managed by Hitachi RapidXchange are
used to exchange data. For details about Hitachi RapidXchange, see the
manual Reference Manual / File Conversion Utility & File Access Library.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
3-6lists the related
3-5