# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
For details on how to execute the view operation and display the SCSI
device name, see
on page
Example
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
example, when you want to execute the command in a shell script or
batch file.
Example
To display the format of the online operation
-help
Displays the format of the online operation.
Example
To display LU information on page 6-50
6-32. Only one case-sensitive parameter value can be specified.
The following shows an example of how to place online all paths
whose SCSI device name is sd52 while confirming command
operation.
# /opt/DynamicLinkManager/bin/dlnkmgr online -path –device
sd52
KAPL01050-I The currently selected paths will be changed to
the Online status. Is this OK? [y/n]:y
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
The following example shows how to place a path, whose
AutoPATH_ID is 000002, online without asking for confirmation of
command execution from the user:
# /opt/DynamicLinkManager/bin/dlnkmgr online -pathid 2 -s
KAPL01061-I 1 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
The following example shows how to display the format of the online
operation:
# /opt/DynamicLinkManager/bin/dlnkmgr online -help
online:
Format
dlnkmgr online [-path] [-s]
dlnkmgr online [-path]
HBA_ID } [-s]
dlnkmgr online [-path] { -cha -pathid AutoPATH_ID | -
chaid CHA_ID } [-s]
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
{ -hba HBAPortNumber.BusNumber | -hbaid
in
Parameters
6-15