To Display The Format Of The Online Operation; Parameters; To Place Paths Online - Hitachi XP P9500 User Manual
Hitachi dynamic link manager software user guide for aix (6.6) (t5208-96012, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (640 pages) ,
- User manual (422 pages)
Table of Contents
Advertisement
[-s]
To Display the Format of the Online Operation
/usr/DynamicLinkManager/bin/dlnkmgr online -help
Parameters
To Place Paths Online
-path
Indicates that the target of the operation is a path managed by HDLM.
This parameter is optional because online is always used for paths, so it
is assumed.
Specify the paths to be placed online by using the -hba, -hbaid, -cha, -
chaid, -pathid, or -hdev parameter. If you do not specify any of these
parameters, the command will place all the offline paths online. If there is
a path that cannot be placed online, a message asks whether you would
like to continue processing. To ignore the offline path that cannot be
placed online and to continue processing, enter y. To stop the processing,
enter n.
-hba HBA-adapter-number.bus-number
Or
-hba adapter-type.adapter-number
Use this parameter to place online, at one time, all the paths that pass
through a specific HBA port. The command will place online all the paths
connected to the HBA port that has the specified HBA-adapter-
number.bus-number or adapter-type.adapter-number.
Specify the HBA adapter number and bus number, or adapter type and
adapter number, of the target HBA port: the numbers are found in the
PathName field displayed using the view operation. Enter a period
between these two parameter values. For details about the view
operation, see
adapter-number.bus-number and adapter-type.adapter-number strings
are case-sensitive.
Example
6-12
view (Displays Information) on page
The following example shows how to place online all paths connected
to an HBA port whose HBA adapter number is 01 and bus number is
01.
When the confirmation message is displayed, the user enters y to
continue, or n to cancel the operation.
# /usr/DynamicLinkManager/bin/dlnkmgr online -hba 01.01
KAPL01057-I All the paths which pass the specified HBA will
be changed to the Online status. Is this OK? [y/n]:y
KAPL01061-I 3 path(s) were successfully placed Online; 0
Command Reference
Hitachi Dynamic Link Manager User Guide (for AIX(R))
6-30. The HBA-
Advertisement
Table of Contents
