Online (Places Paths Online); Format; To Place Paths Online; To Display The Format Of The Online Operation - Hitachi XP P9500 User Manual

# /opt/DynamicLinkManager/bin/dlnkmgr view -path -stname | grep
9500V | grep 0A
The above command will display information pertaining to only those
paths that pass through the specified CHA port.

online (Places Paths Online)

The dlnkmgr command's online operation places offline paths online. Specify
the paths to be placed online by specifying an HBA port, CHA port, or single
path. Instead of specifying a path, you can also specify a SCSI device name.

Format

To place paths Online

/opt/DynamicLinkManager/bin/dlnkmgr online
[-path]
[-hba host-port-number.bus-number
|-cha -pathid AutoPATH_ID
|-pathid AutoPATH_ID
|-device SCSI-device-name]
[-s]

To Display the Format of the Online Operation

/opt/DynamicLinkManager/bin/dlnkmgr online -help

Parameters

To place paths Online
-path
Indicates that the target of the operation is a path managed by HDLM.
This parameter is optional because online is always used for paths, so it
is assumed.
Make sure that you specify the path to be taken online by using the -hba,
-cha, -pathid, or -device parameter. If you do not specify any of these
parameters, the command will place all the offline paths online. If there is
a path that cannot be placed online, a message asking whether you would
like to continue processing will be displayed. To ignore the offline path
that cannot be placed online and to continue processing, enter y. To stop
the processing, enter n.
-hba host-port-number.bus-number
Use this parameter to place online, at one time, all the paths that pass
through a specific HBA port. The command will place online all the paths
6-10
Command Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))