Uninstalling Hitachi Network Objectplaza Trace Library (Hntrlib) - Hitachi XP P9500 User Manual

Note

Uninstalling Hitachi Network Objectplaza Trace Library (HNTRLib)

After you uninstall HDLM version 04-00 or earlier, check the manuals and
Release Notes that came with the software installed on the host. If no
applications other than HDLM are using HNTRLib, uninstall it by following the
procedure below:
To uninstall HNTRLib:
1 Make sure that no applications other than HDLM are using HNTRLib.
.
See the manuals and documentation for each program to check whether
the program is using Hitachi Network Objectplaza Trace Library
(HNTRLib).
2 Log in to Solaris as a user with root permissions.
.
3 Execute the following command:
.
# /opt/hitachi/HNTRLib/etc/hntrsetup
The HNTRLib setup menu will be displayed.
4 From the setup menu, select 9.
.
HNTRLib will be uninstalled.
5 Delete the HNTRLib common library files and the directory in which they
.
are stored.
Execute the commands shown below:
¢
¢
If the /opt/hitachi directory contains only the files and directories
shown above, delete the /opt/hitachi directory.
Note
¢
If you are unable to complete uninstallation even though no programs
other than HDLM are using HNTRLib2, contact your HDLM vendor or
maintenance company if there is a maintenance contract for HDLM.
If the log output directory set in HNTRLib2 was not the default
directory, the log files will not be deleted during uninstallation. In this
case delete these files after uninstallation.
To delete the shared library files (symbolic links):
# rm /opt/hitachi/common/lib/libhntrs*
# rm /opt/hitachi/common/lib/libhntrt*
To delete the directory that contains the shared library files:
# rm -r /opt/hitachi/common/lib/D001
If the log output directory set in HNTRLib was not the default
directory, the log files will not be deleted during uninstallation. In this
case delete these files after uninstallation.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
3-181