Hydraulic Flow (cont'd)
@ position, at high spe6d range
As the speed of the vehicle reaches the prescribed value, the
shift control linear sol€noid moves the shift contror vatve to
increase shift valve pressure (SV) at the left end of the shift valve.
ttre srrit vatve moves to the right side compared to its
position at the middle pulley ratio. The shift valve uncovers
the port leading high pressure (pxito ttre d.ve puley and
uncovers the port leading low pressure (PL) to the driven pulley.
The drive pu|ey receives high pressure (pH) and the driv-
en pulley receives low pressure (pL). The pulley ratio is high.
Pressure remains to apply the forward clutch and the start clutch,
NOTE: When used, "left,, or,,right" indicates direction on the hydraulic