Secondary Valve Body
The secondary valve body contains the PH regulator valve. the clutch reducing valve' the start clutch
and the shift inhibitor valve
PH Regulator Valve
The pi regulator valve maintains hydraulic pressure supplied from the ATF
pump. and supplies PH pressure to the
hvdraulic control circuit and the lubrication circuit. PH pressure is regulated at the
PH regulator valve by the PH control
pressure (PHC) from the PH control valve.
Cluteh Reducing Valvo
The clutch reducing valve receives PH pressure from the PH regulator valve and regulates
the clutch reducing pressure
(cR). The clutch reducing valve supplies clutch pressure (cR) to the manual valve and the start clutch control valve'
supplies signal pressure to the PH-PL pressure control valve. the shift control valve,
and the inhibitor solenoid valve'
Start Clutch Valv€ Accumulator
The start clutch vatve accumutator stabilizes the hydraulic pressure that is supplied to the
Shift Inhibitor Valve
The shift inhibitor valve switches the fluid passage to switch the start clutch control
from electronic control to hydraulic
control when the electronic control system is faulty. lt also suppliss clutch reducing
pressure (cR) to the pitot regulator
valve and the pitot lubrication pipe.
START CLUTCH VALVE
SHIFT INHIBITOE VALVE
PH REGULATOR VAL