Main Valve Body
. Cleanall parts thoroughly in solvent or carburetor cleaner, and drywith compressed air. Blowoutall passages.
Replace the valve body as an assembly if any pans are worn or damaged.
. Check all valves for free movement. lf anyfail toslidefreely, see Valve Body Repairon page,l4-139.
. Coat all parts with ATF during assembly.
CAUTION: Do not use a magnet to removs tha check balls; it may magnetizo the balls.
VALVE CAP CLIP
ORIFICE CONTROL VALVE
lST ACCUMULATOR CHOKE
MAIN VALVE EODY
Inspect for wear, scratches
SEBVO CONTROL VAL
I.2 SHIFT VALVE