Honda Civic Service Manual page 1321

Rear seal belt removal (3Dl:
1 . R e m o v e :
. Rear seat-back and rear seat cushion (see page
20_80)
. Rear center shelf and rear side shelf (see page
20_60)
. Rear trim panel and side trim panel (see page 20
60)
2. Remove the upper anchor cover
UPPER ANCHOR BOLT
7/16-20 UNF
32 N.m {3.3 kgf.m,2it lblft)
UPPER
ANCHOR
RETRACTOR
RETRACTOR BOLT
7/16-20 UNF
32 N.m 13.3 kgl.m.
24 tbf.ft)
REAR SEAT
BELT
LOWEF
3 .
7/r6-20 UNF
32 N.m {3.3 kgl.m. 24 lbf.ftl
Remove all the anchor bolts and retractor bolt. then
remove the rear seat belt and retractor.
4.
Installation is the reverse of the removal procedure.
NOTE:
. Check that the retractor locking mechanism func
tions as described on page 20-91.
.
Make sure you assemble the washers and collars
on the upper anchor bolt as shown.
. Betore installing the anchor bolt, make sure there
are no twists or kinks in the rear seat belt.
Upper snchor boh construction:
COLLARS
Lower anchor bolt construction:
LOWER ANCHOR
TOOTHED
LOCK WASHER
(cont'd)
20-89