1. Using a hydraulic press, press out the countershaft
while supporting 4th gear.
NOTE: Place an attachment between the press and
the countershaft to prevent damage to the shaft.
CAUTION: Do not allow the countershaft to fall and
hit the g.ound when pressed clear.
Assemble the parts on the countershaft as shown
. Lubricate all parts with ATF during assembly.
. Before installing the O-rings, wrap the shaft splines
with tape to prevent damaging the O_rings.
DISTANCE COLLAR, 28 mm
THRUST NEEOLE BEARING
3RO GEAR COLLAR
THRUST NE€OLE BEARING
3RD CLUTCH ASSEMBLY