Hydraulic Flow (cont'd)
The flow of fluid through the torque converter circuit is the same as in E position. The line pressure (1) changes
line pressure (3) and flows to the l-2 shift valve. The line pressure (3) changes to the line pressure (3,) at
the 1-2 shift valve
and flows to the servo valve. The servo valve is moved to the right side (Reverse range position) and uncovers
the port to
allow line pressure (3") to the manual valve as in @ position. The line pressure (3") from the servo valve is Intercepted
the manual valve. However, hydraulic pressure is not supplied to the clutches, and the power is not transmitted.
NOTE: When used, "|eft" or "right" indicates direction on the hydraulic circuit.