Honda Civic Service Manual page 1140

Front Suspension
Knuckle/Hub Replacement (cont'dl
NOTE: Replace the bearing with a new one after removal.
27. Separate the hub from the knuckle using the special
tools and a hydraulic press.
CAUTION:
o Take cale not to distort the splash guard.
. Hold onto the hub to keep it from falling whon
pr$sed clear,
. To prevenl damage to the tool. mak€ sure the
threads are fully engaged belore pressing.
HUB DIS/ASSEMBLY
PILOT,38 mm
07JAF - SH20110
HUB DIS/ASSEMALY
SHAFT.22.{ x 25.4 mm
07JAF - SH20120
28. Remove the circlip and the splash guard from the
knuckle.
Press
BEARTNG
t
SEPARATOR -
O - 1112 in.
(Commercially available)
Check tor bending and damage.
18-14
29. Press the wheel bearing out ofthe knuckle using the
special tools and a Dress as shown,
DRIVER
07749 - (X)l 0000
Pross
t
KNUCKLE
ATTACHMENT,
6 2 x 6 8 m m
07746 - 0010500
HUB DIS/ASSEMBLY BASE
07GAF - SEoo4Ol
Press the wheel bearing
using the special tools, a
press as shown.
WHEEL BEARING
Replace.
inner race from the hub
bearing separator, and a
HUB DIS,/ASSSMBLY
PILOT, 38 mm
07JAF - SH20110
KNUCKLE
FRONT I{U8
HUB DIS/ASSEMBLY
SHAFT,22.4 x 25.4 mm
07JAF - SH20120