Thrust Shim Adjustment
1. Install the differential assembly, making sure it bot-
toms in the clutch housing, using the special tool as
DRIVER, 40 mm LD.
Install the thrust shim.
NOTE: Install the same size thrust shim that was
Install the transmission housing (see page l3-41).
NOTE: Do not apply liquid gasket to the mating sur-
face of the clutch housing.
T i g h t e n t h e t r a n s m i s s i o n h o u s i n g a t t a c h i n g b o l t s
(see page 13-42).
I x 1,25 mm
27 N.m (2.8 kgt'm, 20 lbf'ft}
Use the special tool to bottom the differential assem-
bly in the clutch housing.
Measure clearance between thrust shim
ing outer race in transmission housing.