Reassembly - Honda Civic Service Manual

Reassembly
CAUTION:
. Press the 3rd/4th and the 5th synchro hubs on the
mainshaft without lubrication.
o When installing the 3rd/,lth and the sth synchro
hubs, support the mainshaft on steel blocks, and
installthe synchro hubs using a prsss.
. Install the 3rd/4th and the sth synchro hubs with a
maximum plessur€ of 19.6 kN (2,000 kg, 14,466 lbl.
NOTE: Refer to page 13-67 for reassembly sequence.
1, Support 2nd gear on steel blocks, then install the
3rd/4th synchro hub using the special tools and a
press, as snown.
NOTE:
. A f t e r i n s t a l l i n g . c h e c k t h e o p e r a t i o n o f t h e
3rd/4th synchro sleeve and hub.
. Assemble the 3rd/4th synchro hub and sleeve
together betore installing them on the mainshaft.
Closed end
3RD/4TH
SYNCHRO HU3
DBIVER, 10 mm l.O.
07746 - 00301U)
/ lrrlcHlileNr. ss .- t.o.
07746 - 0030,100
l.
3RD/{TH
SYNCHRO
SLEEVE
2ND GEAR
2.
Install the sth synchro hub using the special tools
and a press as snown.
DRIVER, {0 mm l.O.
07746 - 0030100
ATTACHMENT,
35 mm LD.
sTH SYNCHRO HUB
07716 - 0030,100
3 .
I n s t a l l t h e a n g u l a r b a l l b e a r i n g u s i n g t h e s p e c i a l
tools and a press as shown.
PRESS
+
DRIVER, 40 mm LD.
0?7a6 - It030100